ZENY CUT 50 Plasma Cutter Review – Don’t Let The Price Fool you…

If you’re one of those DIY enthusiasts, the Zeny Cut 50 plasma cutter is made for you. It definitely deserves to be in your sights, if you’re looking as some on-budget plasma cutter options. 

It also works well for hobbyists, needing to cut metal sheets of different sizes. Rather than straining yourself with a metal cutting jigsaw, use the CUT-50! It’ll give you a much cleaner cut, without causing a metal warp either. 

ZENY CUT-50

  • High Efficiency & Energy Saving
  • 110V or 220V Dual Voltage
  • Compact Design & Widely Applications
  • Max cutting thickness: 12mm

It’s made to be sturdy and comes with many helpful features that push it above other models. Compared to other cutters of its price range, it shows impressive performance. You can find many reviewers recommending it online, and I would too! 

Durability is an important aspect to look at when it comes to plasma cutters. The ZENY DC Inverter plasma cutter won’t let you down in that regard. It’s meant to withstand rough use and doesn’t sacrifice functionality and workmanship for it. If you’re on a budget and looking for a precise cutting tool – this might just be it. 

But, you’ve got to make sure you’re getting the best bang for your buck before you buy it. For that, it’s necessary to look at its specs, features, pros, and cons. After all, that’s what enables you to make a well-informed decision about what you end up purchasing. 

I’ve got you covered, I’ll list down and explain these to give you a clearer view of the ZENY CUT 50. 

ZENY CUT 50

Voltage110/220v, 60Hz, 3.5/4.8KVA
Current Range20-50A
Duty Cycle60%
Insulation classF
Max Cutting Thickness12mm
No-load Voltage230V
Main Fuse16/22A
Efficiency85%
Protection classIP21S

Zeny Cut 50 Features

You’ll start to fall in love with the tool right from the point of unboxing it. It comes with quite a huge load of stuff that’ll make your work easier every step of the way. 

The box includes an air pressure regulator, and LG-40 cutting torch, a welding face mask, a pressure reducing valve, chipping hammer. A power cord with a plug is also included in there, along with a small manual. 

You even get goggles, 2 pieces of hoop, 2 pieces of gas pipe clasper and a PG head. All this coming with the product says a lot about the company’s thoughtfulness. 

The ZENY CUT 50 Plasma Cutter is an auto dual-outlet machine. This means that it operates in two ways, explaining why it doesn’t come with a plug or an air hose. But if you want one of those, they’re not pricey at all. Considering the cutter’s price tag, it’s understandable for it to not come with a plug. 

The user manual it comes with is in the English language. I’d recommend every user to go through it before getting your hands on the tool. It’s always useful to get a bit more awareness about the product before making use of it. 

You can cut many different kinds of metal sheets with them. These include stainless steel, copper, steel, aluminum and more. The precision depends upon the steadiness of your hands, to be honest. The grip is decent enough but not as good as some people may prefer. 

If the metal you’re working on is clean, you’re more likely to obtain cleaner results. If the sheet is warped or dirty to begin with, the plasma tip reflects it too. But no matter how clean the piece is, the cutter is able to cut through it within the 1-12 mm thickness range. 

The ZENY Cut 50 brings the latest technology, ideal for metal hardware. I’d say ‘cutting-edge’ technology, but that’d just be a bad pun. It comes equipped with an amazing plasma torch, which designed to improve the cut quality. 

The cutter is honestly suitable for domestic, commercial, and expert use. As long as the sheets you’re working on fall into its thickness range, you’ll have no problems. You could use it on tasks like auto and sewer repair, sheet metal fabrication, maintenance, etc. 


My Favorite Features


Dual Voltage

The ZENY CUT 50, as I said, can work in two different ways. It’s an electric dual-socket tool, and that explains why they don’t shit it with an air hose or plugs. 

Low Sticker Price

When you compare it to some other cutters of its specification class, it’s super cheap. Many buyers consider this as a viable option for its affordable price. If your usage matches its capacity, why spend more than you need to? 

Lightweight Design

It’s designed to be lightweight, and fairly portable. You won’t have much of an issue moving it from point A to B. That comes in handy when you take these to and from the storage between different sites. 

ZENY Cut 50 Pros

  • The ZENY Cut 50 Plasma Cutter gives you clean, precise cuts. 
  • It’s a snappy setup process, just like its cuts. 
  • There’s some good thought put into its design. The fittings and its overall structure seem sturdy. Line 1

ZENY Cut 50 Cons

  • Short ground cable. 
  • Short power cable. 
  • It doesn’t come with an air hose or a plug. 

ZENY Cut 50 FAQ’s


Q. Do I need an air compressor along with it to do the job? 

A. Yes, unlike other models like the Hobart Airforce 12ci, an air compressor doesn’t come built-in. You’ll also need a wire that fits. 

Q. What’s the torch connector cable’s length?

A. It is 12 feet long.

Q. What’s the use for the 2.5S / 5S switch on the front?

A. You could use it to measure the time for which air continues to blast after the trigger is released. 

Q. What makes it worth buying? 

A. While it’s got a variety of impressive features, its compact design takes the cake. It weighs only 22 lbs, which brings some dreamy portability. It’s not as expensive either, so it’s definitely worth the purchase. 

Zeny Cut 50 Conclusion

At a cheap price point, weighing just over 20 lbs, the Zeny Cut-50 performs surprisingly well. The drawbacks are hard to find, and it’s hard to beat this product within its cost range. It brings high value for your money – that’s for sure. You’ll find it useful if you’re on a budget, and your usage requirements aren’t extensively heavy. All the best! 

Looking for more cheap plasma cutting options? Check this out: The Best Cheap Plasma Cutters Under $350 to Buy-In 2020

  • Leave Comments